Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Solon?
Garage door repair in Solon typically costs $150 – $600, depending on what’s broken. A straightforward spring replacement runs $180 – $340 for one spring, while opener repairs land between $120 and $320. New door installation is a bigger project at $700 – $2,200, but most service calls stay well under $500. We give free estimates, so you’ll know the price before any work starts.
Solon homeowners call us for springs, cables, openers, panels, and full door replacements. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so there’s no guessing about your brand when we arrive. The written estimate we hand you sets the final price.
Garage Door Cost Breakdown (2026)
Here’s what garage door work runs in Solon this year. These are typical estimated ranges for the area, and your written estimate is what counts.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
A matched pair of springs is usually replaced together, so plan on roughly twice the single-spring range when both are worn. What pushes a job toward the top of a range: a torsion system that needs full reset, a door that’s come off its track, or a panel that has to be ordered to match a discontinued line. What keeps it near the bottom: a single roller, a cable, or a sensor realignment that takes minutes once we’re on site.
Solon’s housing stock ranges from older ranch homes to newer builds with insulated steel doors. The older doors tend to have torsion spring systems that have cycled tens of thousands of times; newer doors often bring smart openers with battery backup and Wi-Fi boards that fail differently than the mechanical units. Both kinds show up on our schedule regularly, and both fall inside the ranges above.
What Affects Garage Door Pricing in Solon
- Which part failed. Springs, cables, and rollers are mechanical wear items with modest price tags. Openers, panels, and tracks cost more because the parts cost more. A general repair call can land anywhere in the $150 – $600 band depending on the diagnosis.
- Door size and weight. A single-car door takes less material and less time than a double. Heavier insulated doors need stronger springs, which pushes the price up. Solon garages come in both sizes, so we measure before quoting.
- Brand and parts availability. We work on LiftMaster, Chamberlain, Genie, Craftsman, Clopay, Amarr, Wayne Dalton, and Raynor equipment, which covers most of what’s installed in Solon. When a panel or opener board has to be ordered, that affects timing more than price.
- Whether it’s an emergency call. Emergency service is a core part of what we do, not an upsell. We’re open Sunday through Friday, 7am to 7pm, and closed Saturday, so a door that fails on a Saturday gets booked for Sunday.
- Repair versus replace. A 10-year-old opener with a burned-out logic board may cost less to repair than to replace, but a door with multiple failed panels can tip toward a new install. We give you both numbers when the decision is close.
- Ohio weather cycles. Solon sees hard freeze-thaw swings through winter and humid summers. That cycle works on springs, cables, and the lubrication in tracks and rollers. Doors that sat through a cold snap often need adjustment once things thaw, and that adjustment is usually a smaller line item than a full repair.
How to Save on Garage Door
The biggest lever is catching a problem before it becomes two problems. A worn spring that’s still lifting the door is a $180 – $340 spring job. Let it snap and you’re often looking at a spring plus a cable plus a bent track, which climbs toward the top of the $150 – $600 repair range.
- Get the estimate in writing. Our estimates are free, and the written number is the price you pay. Call (844) 900-3998 and we’ll come out and quote it.
- Ask about repairing versus replacing. If your opener is on its last legs but the door is sound, a $120 – $320 opener repair beats a $250 – $550 opener installation. If the door itself is failing in several places, a new system at $700 – $2,200 may make more sense than piecemeal fixes.
- Bundle the small stuff. If we’re already out for a spring, having us look at rollers and tracks in the same visit usually saves a second trip charge.
- Keep the door balanced. A door that slams or lifts hard is working its springs and opener harder than it should. A quick adjustment now is cheaper than a spring replacement later.
- Don’t ignore a slow opener. A motor that strains or a remote that works intermittently is an early warning. Opener repairs at $120 – $320 are cheaper than replacing the unit after it fails completely.
We’re a multi-brand specialist, which means we don’t send you to a second company when the problem turns out to be the opener instead of the door. One call covers spring, opener, panel, or full door. For the full range of what we handle, see Parma Garage Door Repair Co.
FAQs – Garage Door Cost
How much does garage door repair cost in Solon?
Garage door repair in Solon typically runs $150 – $600, depending on the part and the door. Spring repair alone is $180 – $340 for one spring, cable repair is $130 – $250, and opener repair is $120 – $320. Call (844) 900-3998 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when the door panels and frame are sound and only the mechanism has failed. A spring or opener repair at $120 – $340 beats a full installation at $700 – $2,200. Replacement makes more sense when multiple panels are damaged or the door is out of balance beyond adjustment. Call (844) 900-3998 and we’ll give you both numbers.
How much does a new garage door cost in Solon?
A new garage door installation in Solon typically costs $700 – $2,200, depending on size, material, and insulation. Opener installation, if you’re adding one, runs $250 – $550 on top. Call (844) 900-3998 for a free written estimate.
Can you come today?
Yes, in most cases. We offer emergency garage door service for doors that won’t close, won’t open, or leave the home unsecured. We’re open Sunday through Friday, 7am to 7pm, and closed Saturday, so a Saturday failure gets booked for Sunday. Call (844) 900-3998 and we’ll tell you what’s available.
Why did my spring break, and what does it cost to fix?
Springs break from metal fatigue after thousands of open-and-close cycles, and Solon’s freeze-thaw swings speed that up. Replacing one spring typically costs $180 – $340; a matched pair is usually replaced together at about twice that. Springs are under high tension and can cause serious injury if handled without the right tools, so this is a job for a trained technician. Call (844) 900-3998 for a free estimate.
What brands do you work on?
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. That covers most residential systems installed in Solon, so there’s no need to hunt for a brand-specific contractor. Call (844) 900-3998 to confirm your model.
Pricing reflects the Solon market as of 2026. Parma Garage Door Repair Co offers free estimates – call (844) 900-3998.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Anika Patel"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Schaefer"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Mark Sutton